User Manual

moisture and thus no high voltage output or getting low voltage which will affect the
flocking. So keep the machine dry timely and the strong flocking power will recover.
5 Keep the power switch on OFF when you don’t use the machine.
Flocking steps:
1 Put half bottle grass flocking.
2 Put the high-voltage wire hanging on the bottle mouth so that it connects with the wire
netting and thus in an energization state.
3 Coat with gluewater on the surface where you want to flocking.
4 Insert the ground wire into a place near the flocking surface.
5 Slide the power switch on.
6 Press the operation button and wave up and down.
7 Grass flocking will fall down vertically with the static.
8 Grass flocking will vertically and well-proportionedly grow on the glue-coated surface.
Steps 1: Steps 2:
Grass military uniform to the Bottle of high-voltage output lines
bottle for the right amount to half
hanging in the side of the bottle, bottle
metal power state
Steps 3： Steps 4：
Apply glue in place The ground inserted in the grass
in need of grass next to the place
Steps 5： Steps 6：
The power switch to Wobble up and down according