User Manual

Author: John Taylor, UK Page 3 of 4 Date: 7/2/2014
My solution to this problem was to move the front undercarraige.
I marked out and drilled 2 holes as shown below.
Note: They align with holes in the top fuselage which allowed access to the heads of the bolts after
removing the front electronics plate.
The next step was to assemble the motor arms
Parts required
The 4 engine mount arms, 4 engine
mounts, 8 short bolts and nuts and the
green stickers.
Attach the sticker to the top of the engine mount arms, outer end
on the side with the smaller holes.
Punch a hold through the sticker and fit the engine mounts to the
arms.
Note: I forgot to do this until the end so had to remove the engine
mounts from the arms to fit them.