User Manual

42. Insert the wing fence into the pre-reserved slot on the wing
tip, then apply some foam friendly
CIA to fix it.
44. Install the rudder damping board . Same assembly as the
aileron damping board.
46 . Install the ESC with velcro.
48.
Install the propeller .
- 6-
43. Insert the aileron damping board into pre-reserved place,
then apply some foam friendly
CIA to fix it.
45 . Place the strengthen foam slices around the pre-reserved
battery hole and use some foam friendly
CIA to fix. Then insert
the battery into the battery hole.
47. Install the receiver.