User Manual
3. Glue 2pcs carbon fiber strips on the front of wing with some
foam-friendly CIA.
5. Key the rear
of
horizontal fuselage into the wing and apply
some foam friendly C/
A.
7. Fix the lower vertical fuselage to the horizontal fuselage with
some foam friendly C/A. Make sure they'
re
vertical, no distortion.
9. Install the round doublers to the pre-reserved holes
(2
places)
on the wing forehead
to
strengthen the joint
of
carbon fiber rod
and foam.
-2-
4. Use some foam friendly C/A to glue the head
of
the horizontal
fuselage
to
the wing, see above picture.
6.
Install the round doublers to the pre-reserved holes
(6
places)
on the lower vertical fuselage.
8. Install the landing gear reinforcements.