User Manual

Settings on T6 Config For
V911 (Once Binded)
To bind just hold in the bind button and turn on the tx whilst holding bind
button.
Now while still holding bind button turn on the V911 (HK FP100) and it
will blink fast. Once it starts to blink slowly it has binded. Now turn off
both TX and heil. Turn both back on and it should work but make sure
you dial in these settings first
Type: heli90
End points: CH 1-4 120%
reverse: CH 1 & 2
DR: 100 / 85 (personal preference)
Throttle curve: -30, 25,50,75,100
Pitch curve: 0,0,0,0,0
Swash AFR: 100%
All Mixes turned off
Switch B: DR (personal preference)
Switch A: throttle cut (personal preference)