User Manual

第 - 2 - 页 共 7 页
2. Set throttle trip
Firstly, the user must understand the performance of the remote control , the range and direction of throttle control.
what’s your purposes for the model you are handling. For different purpose it has different setting for the model.
Set throttle with gun-type remote control
Cut off the main power supply of ESC, turn on the power
supply of transmitter and receiver. Pull the transmitter
throttle to the end(Max of the throttle),connect the
main power of ESC and wait for 2S ,the motor will make 3 sound of BEEP
like“∮∮__∮∮__∮∮”.When hearing the third sounds, please loose
the throttle to the middle (if you set full throttle, pull to the highest of
reverse direction.)When motor makes 1 sound ∮,the set of throttle trip has finished and stored in the ESC.
Wait for 2S, motor will make single sound for many times. After the single sound, It will make 2 continuous
sound∮∮ .At this time, it shows ESC has been ready. Motor can work by increasing the throttle
Set throttle with Panel-type remote control
●Cut off the main power supply of ESC, turn on the power
supply of transmitter and receiver. Pull the transmitter
throttle to the end(Max of the throttle),connect the
main power of ESC and wait for 2S ,the motor will make 3 sound of BEEP
like“∮∮__∮∮__∮∮” (it shows the Max throttle is ensured by ESC.)When hearing the third sounds, please loose
the throttle to the middle (if you set full throttle, pull to the highest of reverse direction.)When motor makes 1 sound
∮,the set of throttle trip has finished and stored in the ESC.Wait for 2S, motor will make single sound for many times.
After the single sound, It will make 2 continuous sound∮∮ .At this time, it shows ESC has been ready. Motor can
work by increasing the throttle.