User Manual

- 2 -

Please read before operating this system!

e would like thank you for purchasing our new product –Bae Hawk

designed for the hobby enthusiast. Base on its full - scale counterpart,

this Great British Jet can finish loops, inverted flight and rolls and

other aerobatics easily. It is also made as a highly maneuverable

model for the intermediate to expert pilot. With the Bae Hawk model

which includes EDF set*, speed controller, electric servos, retractable

landing gear with front steering and full scale functional lighting

system. You will have joyful time in model flying.

Remarks:*

We have several different metal EDF sets for your selection.

1) Rclander 64mm metal EDF is a higher grade EDF set which is an

aluminum alloy material EDF more powerful output, efficient and

durability.

2) Please be noticed that all servo have been pre-set the center point

before out of factory. It maybe appeared some difference due to

difference brand mark radio control. Kindly make sure to do the

adjustment (special to pre-set the travel throw of gear servo up

to 110-115 %. ) with your own radio equipment before installation

this jet model.

4) From main wing edge to center around 72mm±2mm is the CG

point.

5) Please make sure to use a little piece of attached velco to secure

your LiPo battery for fixing on the battery bay before flying.

Specifications:

Wing Span :

750mm

Length:

860mm

Flying weight:

1.1kg

Servo:

9g×7pcs

Power system:

Brushless electrical metal ducted fan(3900kv/4300kv)

Thrust:

Up to 1.2kg

Function:

1) Retractable landing gear

2)Lighting system

ESC:

50A or above

Radio:

5CH or above

Battery:

Li-po 14.8V/4S-2200mAH or above