User Manual

- 14 -
Flight attention
Do not fly at any place where another same-frequency model is being operated.
Taking off:
Always take off toward the wind.
When launch Bae Hawk by hands, maximize the power (include the micro-adjuster) and run several
meters, then throw the Bae Hawk horizontally. When launch Bae Hawk on the ground, maximize the
power and let Bae Hawk accelerate in direction of the wind and keep it running straightly, after it run
more than 60 feet, then pull the elevator joy stick, and it will take off.
Flight:
To keep Bae Hawk flying only need 50% of the maximum power, it is a good idea to fly with power for
a while and glide for a while. In this way you can prolong the maximum flight time and familiarize
yourself with landing approaches.
Landing:
Before landing, switch off the power, fly along with the wind, and when Bae Hawk flies near to the
ground, then pull the elevator joystick and Bae Hawk will landing gently. With more practice, then you
could control the model easily.
Phenomenon
Problem
How to solve
Motor does not run
★ Battery is not fully charged.
★ The battery in the transmitter is not at full power.
★ The circuit in Bre Hawk has been damaged due to
crash.
★ Charge the battery.
★ Install new dry cells.
★ Contact the distributor.
Can not fly straightly
★ The rudder is not on the center position.
★ Adjust the rudder on the center position.
★ Adjust the micro-adjuster on the
transmitter for the rudder on the suit
position.
Can not climb
★ The battery is not fully charged.
★ The elevator declines downward.
★ Charge the battery.
★ Adjust the micro-adjuster on the
transmitter.
Control distance is very
near
★ The battery of transmitter is not at full power.
★ The antenna of transmitter has not been completely
pulled out
★ Install new dry cells.
★ Completely pull out the antenna of
transmitter.