bat-safe_manual

c. Minimize gapping and
ensure the upper and
lower lip of the wire
way is properly seated
on outside of box lid.
3. Charger wire hookup:
a. Connect charger and balancing wires as usual. Ensuring
wires do not pass over exhaust holes in lid.
b. Hot exhaust from a battery fire can damage charger, do not
allow charger or wires to hang over vent holes
4. Usage
a. Place box on fire resistant surface ensure at least 12
inches or 30 cm of clear space above lid exists prior to
using box.
b. Place battery in box, hook up charging wires as normal.
Removing friction feature on connectors can make
plugging and unplugging of wires much easier.
c. Close lid and latch