Wiring box for HK Paramotor

HOBBY KING PARAMOTOR WIRING BOX
I ’d tried to use the mixing program of my Spektrum Dx7 to get the course for the HK paramotor servos.
It was impossible, so i ’ve ordered from HACKER gmbh a paramix. With the receiver, the servos and the paramix
i get a lot of wires.
So i made a box to enter all these leads. 3D printed with a PLA protype and after, a PETG box and door.
You can find the .stl on Thingiverse: HOBBY KING PARAMOTOR BOX
Receiver, paramix, and servos wirings
waiting for a home.
Fixing the box needed longer screws.
I changed other screws to insert washers...
The box is filled...
... and closed
HAPPY FLIGHTS !
HOBBY KING :