LY Manual

8
7
10. Attach rear axel to hull, taking care to center it. Do not over tighten
mounting screws.
11. Apply a drop of thin CA glue to connect the two mast sections.
12. Slide the sail to the mast, starting with the top loop.
13. Fasten top sail eyelet to skidplate with included cable tie. Leave sail
attached to mast, even during storage to prevent wrinkles.
14. Secure sail base to boom by inserting included toothpick through pre-drilled
hole in boom.
15. Loop rubber band around screw head, insert rubber band through the
eyelet, then loop around screw head again. This keeps proper tension on sail.