X-Car 45A ESC manul

X-Car 45A Programmable Brushed ESC

A. Feature:

• Suitable for 1/10 Truck & Buggy.

• Auto record Neutral Point.

• Programmable LiPo Battery Low Voltage protection.

• Programmable Thermal Protection.

• 2 Modes available: Practice & Climbing.

B. Specification:

• Input Voltage: 6 - 7.2v (NiMh) / 7.4v (LiPo).

• Output Current: 45A continuous, 340A burst (10 sec).

• BEC Current: 5.6v / 2A.

C. Connection:

PAGE 1
X-Car 45A Programmable Brushed ESC A. Feature: • Suitable for 1/10 Truck & Buggy. • Auto record Neutral Point. • Programmable LiPo Battery Low Voltage protection. • Programmable Thermal Protection. • 2 Modes available: Practice & Climbing. B. Specification: • Input Voltage: 6 - 7.2v (NiMh) / 7.4v (LiPo). • Output Current: 45A continuous, 340A burst (10 sec). • BEC Current: 5.6v / 2A. C.
PAGE 2
D. Instruction: LiPo Battery Low Voltage Protection / Thermal Protection Setting ESC stops power while Voltage < 5.6V or Temperature > 90℃; Resume while Voltage ≧6.5V or Temperature < 90℃. To check current status: Switch on ESC and check Motor’s “Beep--”: • Motor “Beep--” + “SI-LA-SO--” or “SO-LA-SI--” Status: Record Neutral Point + Protection OFF • Motor “Beep--Beep--” + “SI-LA-SO--” or “SO-LA-SI--” Status: Record Neutral Point + Protection ON To Program: 1) Hold “Programming Switch”.