manual

“Menu”: Change the programmable items circularly;
“Value”: Change the parameters of each programmable item circularly
Note: Keeping the “Menu” or “Value” button holding can select the desired parameters quickly.
“Reset”: Return to the default settings
“OK”: Save the current parameters into the ESC. If you don’t press “OK” button, the customized settings will not be saved and updated into
the ESC. If you just press “Menu” button, the customized settings are just saved into the program card, not into the ESC.
E.g.: Firstly, enter the interface of a customized programmable item (e.g.: cut-off voltage 3.2/cell); Secondly, press “Value” button to select
the parameters; At last, press “ok” button to save the parameters in the ESC.
*Working as an USB adapter to link the ESC with a PC to update the firmware of ESC and set the parameters on PC.