User Manual

Use programming card
Use programming card to set the ESC is the most ideal and convenient choice, only insert the signal line of ESC into
the programming card, select the item you want to change (see table above),press [OK] ,VALUE window displays "S.
(To restore the last option press the [RESET] then click [OK] ).
Setting (programming) item description and term explanation
★ 1
Operation mode
Forward with brake: can only move forward, when throttle reverse, it is brake. without reversing. this mode is
mainly used for racing.
Prompt
sound
projects
1 short
beep
2 short
beep
beep
3 short
beep
beep
beep
4short
beep
beep
beep
beep
5 short
beep beep
beep beep
beep
1 rising
tone
↑
2 rising
tone
↑↑
3
rising
tone
↑↑↑
4
rising
tone
↑↑↑↑
Operation
mode
Forwar
d with
brake
Forward
and
Reversi
ble with
brake
Direct
Forwar
d and
Revers
ible
4.Neutral
range
6% 9% 12%
Battery low-
voltage
protection
Non
Protecti
on
2.6V 2.8V 3.0V 3.2V 3.4V
6.start up
acceleration
1 level 2 level 3 level 4 level 5 level 6 level 7 level 8 level 9 level
5.reverse
Force
25% 50% 75% 100%
6.entrance
angle setting
0
degree
5 degree 10
degree
15
degree
20 degree 25
degree
30
degree
automatic
第 4 页 共 6 页