User Manual

the sound
∮.
Shows the power supply voltage of ESC is in the appropriate range. If there is no sound, shows
the voltage of ESC’s battery pack isn’t in the specified range. For example, ESC’s voltage is 2-6S, if it’s lower than 2S
or higher than 6S, ESC won’t make sound.
》
d “N”times sound , motor will make continuous 2 short sound
∮∮
ESC enter the process of remote control throttle trip automatic practice. It can operate with starting by controller
.
. Ⅳ Set the alteration of main options
》
1 When starting with factory default parameter, it won’t enter “4 set alteration of main options”.
》
2 The processing of altering ESC’s parameter is as following:
》
3 If ESC has connected in the circuit, please check if ESC has connected battery pack.
If connected battery pack, please disconnect battery pack first.
》
4 Push the throttle of remote control to the Max position in the forward direction and keep in this position. Connect
the disconnected battery pack in the circuit again , wait for 2S.
*1 Motor makes the sound of BEEP“
∮∮
__
∮∮
__
∮∮__
”
*2 Motor makes the sound of BEEP“
∮
↑
∮
↓__
∮
↑
∮
↓__
∮
↑
∮
↓__”
Enter main options 1
～
6
BEEP“
∮
__
∮
__
∮__
”3 times
，
main option 1
BEEP“
∮∮
__
∮∮
__
∮∮__
” 3 times
，
main option 2
BEEP“
∮∮∮
__
∮∮∮
__
∮∮∮__
” 3 times
，
main option 3
BEEP“
∮∮∮∮
__
∮∮∮∮
__
∮∮∮∮__
” 3 times
，
main option 4
BEEP“
∮∮∮∮∮
__
∮∮∮∮∮
__
∮∮∮∮∮__
” 3 times
，
main option 5
BEEP“
∮
↑__
∮
↑__
∮
↑
__
” 3 times
，
main option 6
*3 When you hear the sound of the main option that you want to set, please loose the throttle to the middle, enter “the
sub option of this main option”.
*4 “ prompt tone chart”, every sub option makes 3 sounds as the order in the chart. Don’t move the throttle, it will
make sound in the 3 sub options circularly. When hearing the sound that you wanted sub option . Push the throttle to
the Max in the forward direction. When making 1 sound “
∮
_”, shows this sub option has set successfully.
Keep the throttle in the Max position and back to the main option.
*5 Set 1~6 options as this procedure.
*6 Push the throttle to the minimum (the Maximum of the reverse direction). Back to the middle after the short sound.
Note: “*2”in “
》
4”, when hearing the third sound, please push the rocker to the lowest throttle. The parameter of
ESC will restore factory default. It’s effective to restore the disordered parameter. When hearing the 2 short sound
“
∮
_”, shows it restores factory default( don’t set other options) , you can operate with the mode that manufacturer
setted.
The chart of prompt tone
第 3 页 共 6 页