User Manual

ManualsBrandsHobbyKing ManualsHobby5 inch 800x480 5.8 GHz Little Pilot HD FPV Monitor with Mushroom Antenna and Bracket

2 3 4 5 6 7 8

HAWK-EYE Little Pilot 5" FPV monitor

Specifications and Features

1. Mute button

2. Up/Auto channel search button

3. Power/ Menu button

4. Down/Reference scale show/hide button

5.Video output port

6.Video input port

7.Battery charging status light

(will turn OFF when the battery is fully charged)

8.Micro USB Charge port

Summary of content (5 pages)

PAGE 1
HAWK-EYE Little Pilot 5" FPV monitor 1 2 3 4 5 Specifications and Features 1. Mute button 2. Up/Auto channel search button 3. Power/ Menu button 4. Down/Reference scale show/hide button 5.Video output port 6.Video input port 7.Battery charging status light (will turn OFF when the battery is fully charged) 8.
PAGE 2
Resolution 800×480（HD) Backlight LED LED Screen Brightness 700 cd/m2（HD） Power Supply Input Aspect ratio Response time Color system Battery life Signal Output Signal Video Matching antenna Interface RP-SMA 5.8G Sensitivity -94db Button name Mute button Adjustment button(+) Adjustment button(-) Power/Menu button 3.85 16：9 10ms PAL/NTSC 2.
PAGE 3
External Video Interface 3.85 00：30 AV3 Display Interface Setting Press Menu button to popup menu setting: Frequency Group Selection You can manually select the desired frequency from 4 groups: A, B, C and D, or select SCAN option to start auto search. Thirty-two 5.8G channels are covered: A1: A2: A3: A4: A5: A6: A7: A8: 5.645G 5.665G 5.865G 5.705G 5.885G 5.905G 5.925G 5.945G B1: 5.740G B2: 5.760G B3: 5.780G B4: 5.800G B5: 5.820G B6: 5.840G B7: 5.860G B8: 5.
PAGE 4
Format: 3 options are provided: AUTO/ PAL/NTSC. If AUTO selected, the input video system will be automatically Saturation: Control buttons: (-), (+). Range: 1-99. identified. System setting will cause display failure. Voltage trimming: Range:-10~+10 (-0.1V~+0.1V) GAMMA: Control buttons: (-), (+). Range: C1-C3. Language: Control buttons: (-), (+). Options: Chinese and English Brightness: Control buttons: (-), (+). Range: 1-99. Reset: This option leads back to factory default settings.
PAGE 5
FAQ The video displayed is black-and-white: Check whether the camera output is black-and-white (some cameras might automatically shift to black-and-white in low-light conditions) Video display is abnormal: Try resetting the machine. Set the video format to AUTO. No response when turned on: Try charging the machine for 30 minutes, notice whether the Charging Status Light is on or not. No channel can be received: Install antennas, and move the monitor close to the 5.8 GHz transmitter.