User Manual

3D/Multi-View Product Manual
1 Function,This item has two functions.
1.1 Multi-View/Multi-Picture/Multi-Camera System(2D)
Up to 4 ways CVBS video signal,Merge 2/3/4 ways video input to one video
input.Achieve PIP(Picture in Picture)function,and we can switch to different MV
modes via buttons or radio receiver,moreover,we can switch to different cams’
standalone image model via another radio receiver signal.
1.1.1 For the video output,It’s stardard CVBS signal,Can be connected to AV
supported devices,Wireless transmitters and third party OSDs.
1.1.2 6 Multi-View modes,Please check the " Multi-View Schematic"。
1.2 3D Video Output
The left and right two-way videos,through 3D video processing
procedures,then we have one way true 3D video.
1.2.1 This item’s 3D video output is stardard CVBS signal,can be connected
to display devices or wireless transmitters.
1.2.2 This item’s 3D video formart,Contains HSBS(Half Side By Side and
SBS(Side By Side)(Cropping),Can be switched by button or radio receiver.
1.2.3 3D Cam,Please use FPVELITE 3D Cam,and it can be rebranded.
1.2.4 During FPV to watch this item’s 3D video,We usually use Headset or
Goggles,but some of them don’t support 3D video input,Please use the Headset
of Goggles which support HSBS or SBS 3D video.
Note:3D/MV Function,Can be selected by Jumper Plug.。
2 Specification
Video input format：PAL、NTSC