User Manual

7/08/12 11:41 PM
Page 9 of 16http://www.rchacker.com/diy/simonk-esc-firmware-flashing?tmpl=%2Fsystem%2Fapp%2Ftemplates%2Fprint%2F&showPrintDialog=1
Double check all your connections with a multimeter and that each screw is touching its pad and not
other screws Put it aside for now we now have to sort the software out.
Step 3: Flashing.
Two options here KKMultiTool or the good old command line.
Flashing with KKMultiTool.
Go to the kkMultiTool website and download the latest stable version.
Unzip it open the folder and double click on kkMultiCopterFlashTool.cmd