User Manual

Thank
you
for
purchasing
Hobbyking
Brushless
Electronic Speed
Controller
(ESC),
This
series
is designed for
fixed wing
and Helis.
It features supcr smooth
start up and
throttlc
linearity,
multiple protection,
low cost
and bcst
performance
at this level
ofproduct. This is
not a
toy, only for
adult. Age
under 14
should be superviscd with
adult.
plcase
read
this
manual
carefully
before using
this
product
for the
sake of safety. Hobbyking
has no control
over
the usc, installation,
appiication,
or maintcnance of these
products,
thus no
liability
shall be assumed
nor accepted
for any
damages, losses
ofcosts resulting from
the use
ofthis
itcm.
Important
Warnings
Hobbyking
is not rcsponsible
for
your
use ofthis
product,
or any damage
or injurics
you
may
caùsc or sustain
as a result
of its
usage.
Always
place
safety as
priority
when
you
use
the
product
An
electric motor
that is connectcd
with
battery
pack
and ESC
may start unexpectedly
and
cause scrious
danger. Always
treat
them with enough rcspect.
We
rccomnrend
you
to removc
the
propeller
when
you
working
on thc
plane
that
with
powcr
source
connccted.
Obserue
all local laws
when
you
fly a RC aircraft
or other RC vehicles
Never
fly over
others or near
crowds.
Wires
Connection:
The
speed controller
can
be connected
to thc motor
by soldering
directly or with high
quality
connectors.
Always use
new connectors,
which should
be soldered
carefully to the
cables and insulatcd
with
heat shrink
tube.
The maximum lcngth
of the battcry
pack
wircs
shall
be within
6 inches.
.Solder
controller
to thc motor
wires.
.Soldcr
appropriatc
connectors
to
the battery wires.
.lnsulate
all solder
connectors
with heat
shrink tubes.
.Plug
the
"JR" connector into
the receivcr
throttle
channel.
.Controller
Red and
Black wires
connects
to battcry
paÇk
Red
and Black wires
respectively.