User Manual

7、ＦＱＡ：
a)、Why keep a blank area (White lines on the back part) on Mi-0103MRX-S and Mi-0104ARX-S？
Will it add the weight？
Answer: Weight is very important for micro-airplane. If we can make the plane reduce a little weight, even 0.1g, we will insist on it.
Through long-term exchange with numerous micro-airplane enthusiasts, we find it can bring some complicated negative
impacts such as increased weight and disassembling trivial if wrongly fixing the receiver.
Safe, convenient fixed way can bring many advantages to the design, production, flight and maintenance of micro-airplane.
After repeated experiments, we find that double-sided adhesive tape is the best for fixing, so, when designing these two
rec ei vers , w e ret ai n a bl ank are a sp ec ial ly (Whi te li n es on the ba ck part ).
Whichever your lover is micro-KT airplane, micro-pellicle airplane, or micro-emulation airplane, just keep a small piece of
space on the proper position of airplane, you can fix the receiver securely with a small piece of double-sided adhesive.
The blank areas on the receiver seemingly will add a bit of weight, but in fact will reduction more.
b)、Why use 1mm JST on Mi-0104ARX,Mi-0104ARX-S?
Answer: When assembling and micro-airplane, replacing electronic equipment is unavoidable, while micro-airplane has intensity
differe nce, a nd t he s pac e is lit tle, it ’ s easy to break it.
1.25mm JS T on gen er al micro receiv er needs mo re ef fo rt s to insert or remov e, whil e you just nee d a p ert ur bati on son to
insert or remove 1mm JST, and when its plug and socket installed properly, it’s very stable.
With precise measurement, the strength for inserting and removing 1mm JST are 4.1N and 3.8N, while 1.25mm JST needs
9.4N a nd 9. 6N.
Warning: * Prohibit changing the type of ESC when the motor is connected;
* Prohibit connecting a brush motor when it is ESC for brushless motor;
* Prohibit putting it on metal surface when power is on;
* Prohibit using these products in the high temperature and high humidity environment;
* Please notice the place of anode and cathode when pit in the batteries;
* Non-normal use damage is not responsible for warranty.