User Manual

Mi series RX user's manual
For Mi-0103MRX, Mi-0103MRX-S, Mi-0104ARX, Mi-0104ARX-S, Mi-0006BRX.
 Mi s eries product s are a gro up of s uper tin y receive r t hat integrat es ES C for bru sh mo tor. They have small v olume, light
weight, and can be the best partner of micro-airplane;
 Mi series rec eiver includes standard servo type and magnetic actu ato r servo type; the forme r is applica ble t o
micro- airpla ne whos e weight with in 15 ~200 gra ms ; the latt er is applicable t o the weig ht wi thin 15grams;
 To make the receiver convenient to install, we keep a no components area in two models, you can use a small piece of
double-sided adhesive to fix it in your machine.
A、Product specification
Type MI-0103MRX MI-0103MRX-S MI-0104ARX MI-0104ARX-S MI-0006BRX
Number of channels 3CH 3CH 4CH 4CH 6CH
Band 2.4G 2.4G 2.4G 2.4G 2.4G
Internal ESC 2A Brushed ESC 2A Brushed ESC 2A Brushed ESC 2A Brushed ESC None
External ESC Supported Supported Supported Supported Supported
Supported servo type magnetic actuator magnetic actuator Standard standard standard
JST type 1.25mm JST 1.25mm JST 1mm JST 1mm JST 1.25mm JST
Recommended fixed way none
double-sided adhesive
none
double-sided adhesive
none
Voltage Range 3.0V~4.2V 3.0V~4.2V 3.0V~5.0V 3.0V~5.0V 3.0V~5.0V
Size / mm 20.50x11.0x3.7 20.0x12.0x3.6 18.8x11.0x6.4 21.4x12.0x6.0
Weight 1.0g 0.65g 1.0g 0.8g 1.6g
Antenna Length 56mm 30mm 56mm 30mm 30mm
Programming function A A, B, C A A, B, C, E none
NOTE: Please refer to “Programming function” for the instruction of programming function.
B、Instructions
1、Connect the motor:
 Mi-0103MRX, Mi-0103MRX-S, Mi-0104ARX, Mi-0104ARX-S have internal 2A ESC for brush motor, and support
extern al ES C;
 When connecting a brush motor, before binding, you need to set the SW1 on the module to ON; for the external ESC, you
need t o set t he SW 1 on the m odul e t o O FF;
 When using internal ESC for brush motor, it’ s in locked state after powered for security reasons, Only when pushing the
throttle stick to its lowest setting (Enable the throttle reverse function, and set the throttle trim switch to the lowest), and stay
about 1 seco nd, whe n L ED on th e rec eiv er is in dark f or 1s, it shows i t has bee n unloc ke d, t hen y ou c an c ontr ol it ;
 Please see the addendum for the wiring diagram for brush and brushless motor (Brush motor on the Mi-0104ARX-S is
welded on the opposite pad of the receiver).
2、Connecting the servo:
 Mi-0103MRX, Mi-0103MRX-S are magnetic actuator servo type receiver, please see the addendum for the wiring
diagram;
 Mi-0104ARX, Mi-0104ARX-S are standard servo type receiver, We recommend that you use digital linear servo