User Manual

User's manual for RF-MFX600-X series smart sel f-adaption module
For RF-MFX600-F, RF-MFX600-J, RF-MFX600- H.
The system uses the smart self-adaption FHSS algorithm, it can automaticly select free frequency when power on;
If there is periodic interference or channel jams beyond the set time, it will automatically update the hopping frequency
group, this insures the stability to the hilt;
Our own unique features are as following:
1、 The bind switch designed in anti-collision, which can prevent operating error;
2、 There are five programming switches to set various functions of Mi and Mx series receiver;
3、 The ESC type of Mi and Mx series receiver can be programmed;
4、 The internal linear servo controlled channels of Mx series receiver can be programmed;
5、 The output channel of Mi and Mx series receiver can be programmed.
AProduct specification
Type RF-MFX600-F RF-MFX600-J RF-MFX600-H
Size/mm 58.15x37.26x22.05 64.46x51.80x23.27 58.15x37.26x22.05
Weight 42.5g 49.3g 42.5g
Max imu m t ransmission powe r 18DBm 18DBm 18DBm
Band 2.4G 2.4G 2.4G
Voltage Range 5.0~12.0V 5.0~12.0V 5.0~12.0V
Signal Type PPM(50mV 2~5V) PPM(50mV 2~5V) PPM(50mV 2~5V)
Support the external signal Yes Yes Yes
Applicable Transmitter FUTABA,SPEKTRUM JRSPEKTRUM HITEC,SPEKTRUM
NOTE: 1) For FUTABA, JR an d HITEC transmitter, tho se suit able for module can be suppor ted;
2) Besides DX6i and DX7 , o ther typ es havent been tested.
BInstructions
1Programming function:
Please refer to the instructions of Mi, Mx series receiver.
2Port distribution:
3How to connect with FUTABA, JR or HITEC transmitter:
RF-MFX600-F/J/H can be installed directly to the position where original module was installed of FUTABA, JR and HITEC
transmitter.
CON1 CON2 CON1 CON2
CON3

Summary of content (9 pages)