Operation Manual

Gas
09-5
Open the door of the gas bottle cabinet.
Close the main stop valve on the gas cylinder. Pay attenti-
on to the direction of the arrow.
Unscrew the gas pressure regulator with the gas hose by
hand from the gas bottle (left-handed thread).
Loosen the xing strap and remove the gas cylinder.
Replace the full gas cylinder in the gas bottle cabinet and
carefully fasten it using the xing straps.
Screw the gas pressure regulator with the gas hose by
hand on to the gas bottle (left-handed thread).
Check that gas is not escaping from the connection point
using leak detector spray.
Close the gas bottle cabinet door.
Do not smoke or ignite open ames while changing the gas
cylinders. After changing the gas bottles, check whether
there is any gas escaping from the tie-in point by spraying it
with leak detection spray.
Gas stop valves
Every gas device is tted with a corresponding gas stop
valve. The gas stop valves are located in the kitchen drawer
above the cutlery tray and are labelled with the
corresponding symbols.
Changing gas cylinders