Operation Manual

6. Interior structure
45
Converting the Round Seating Arrangement
• Remove the seat
j
and back cushions
k
.
• Lower the table. (see Chapter 6.3).
• Replace the seat cushions
j
and pull them to the middle of
the table.
• Fill the outside areas with the side back cushions
k
.
6.4 Seating arrangements and sleeping areas
The seat groups can be converted into comfortable beds.
The rear seat cushions in round seating arrangements remain in
place.
2
2
1
1
When converting seating arrangements into beds, do
not place the cushions directly on the tabletop as this
may cause scratches or mildew due to condensation.
We recommend that you use an absorbent cloth (e.g.
terry cloth or cotton).
Ensure that the tabletop, seat chests and/or covers as
well as cushions are well secured so that nothing falls.
Converting the seating arrangement to a bed
Bed Expansion for Long Beds*
Setting up the beds
Setting up the beds
If, when setting up the bed, it juts into the front window,
the integrated sunshade and insect screen should rst
be opened. Otherwise the screen might be damaged!
Converting the bed expansion
• Lift up the night table
j
and remove it.
• Pull on the handle
k
and pull out the slatted frame fully to a
horizontal position.
• Insert the mattresses
l
to expand the beds.
While driving, the night table must be stored in the lower
bed frames. Otherwise, the night table might be released
when braking suddenly and damage the interior of the
camper.
If the night table is placed back on its base, it must be
tted to the retaining plate
m
in such a manner that it
cannot slip.
Converting into a wider bed
Widening the beds
1
2
3
4