Operation Manual
4. Wheels, tyres
30
D Hold the bottle down with the lling tube and then press them
together. Press the entire bottle contents into the tyre. Pull the
ll hose o
j
and screw the valve insert
k
tightly into the
tyre valve with the valve-core remover
l
.
F Adhere the provided sticker to the combination instrument
within sight of the driver. Dispose of used tyre repair kit at a
service station.
E
Open the air hose
n
on the tyre valve. Insert the plug
o
into
the cigar lighter socket. Then pump the tyres (Fig.
p
).
Do not operate the electric air pump longer than 8 minutes!
Danger of overheating! If sucient air pressure is unattainable,
drive 10 meters (either forward or in reverse) so that the
sealant can be evenly distributed within the tyre. Repeat the
pumping process. Resume driving immediately, so that the
sealant can be evenly distributed within the tyre.
Maximum speed: 80 km/h. Drive carefully, especially in curves.
Check tyre pressure after driving 10 minutes. If the tyre
pressure has fallen under this minimum value
q
, you may not
drive any further. Should the minimum value
q
still be displayed,
correct the tyre pressure in accordance with the tyre pressure
sign in the gas bottle container. Drive carefully to the
nearest mechanic and have the tyre replaced.
Danger of accidents!
If the required tyre pressure is
still unattainable, the tyre is too severely damaged. In
this case, the tyre repair kit can no longer provide an
eective seal. Therefore, do not drive any further.
Notify a service station or the 24-hour service hotline.
Danger of accidents! Have the tyres replaced at the
nearest service station.
Press the entire bottle contents into the tyre
Pumping up the tyre
Mounting stickers in the driver's eld of vision