Operation Manual

08-5
•
Empty the therme at the risk of frost. Frozen
water can cause the therme to burst!
• A depressuriser must be used if the pump is
connected to a central water supply, or on
stronger pumps. The pressure in the therme
may not exceed 1.2 bar. In addition, a safety
valve or runoff valve must be used in the cold
water tap.
Never operate the therme electrically
when it is empty.
Please also note the manufacturer‘s
separately enclosed operating in-
structions.
Hot-water function in the shower in
Premium vehicles
•
The shower regulator in the Premium vehicles
rst regulates the amount of cold water up to
a certain point.
If you turn the regulator beyond this point,
you will get hot water.
However, the amount of hot water
can then no longer be regulated. This
is only possible when the regulator is
turned to cold water.