Operation Manual

07-17
At present, operation via a surfstick
is not yet supported.Please use the
WLAN menu in the LCD display to
switch WLAN operation on and off.
After switching it off, “WLAN shut-
down” will be displayed for approx.
60 seconds. When “WLAN: Off” is
displayed, the camper's entire power
supply can be switched off.
The SD card may be damaged if the
camper's power supply is discon-
nected (from the mains or the battery)
without having shut down the WLAN
correctly.
General information regarding the LCD
display
The time and date are buffered by a 3V 210 mAh,
CR2032 type button cell. If, therefore, the time
should be incorrect or the clock should stop
working, this button cell must be replaced. It is
mounted on the reverse of the circuit board of
the LCD display. To replace this button cell, the
LCD display must be removed from the furniture
front by carefully clipping the chrome-plated fra-
me out of its holder. You will then see the screws
that fasten the plastic part to the furniture.
Loosen these screws to detach the display.
When replacing the button cell,
please ensure that plus and minus
are in the right direction. Incorrect
polarity may cause the display to
become defect.