Operation Manual
07-16
Then select the network, enter the password and
click on the “Connect” button to conrm. You can
now call up the website http://192.168.0.1 in the
Internet browser.
By continuing to turn and conrm the rotary en-
coder on the control panel, you will reach the Web
server data, which is required to open the data in
the Web browser.
Settings can be called up and changed in the
browser on page 192.168.0.1/cfg.php:
Click on the „Get“ button to call up the set va-
lues.
After making any changes, the changed values
must be saved by clicking on the „Set“ button.
These changes will take effect after approx.
2 minutes.
The name of the network and the password can
be changed here. This also applies for the Web
Interface Settings. At present, the UMTS and
No-IP settings are not yet supported; they have
only been integrated for future applications.
After entering the correct access data for the Web
server, the page for operating the devices and
switching on the lights will be displayed.