Operation Manual

07-15
WLAN-Module *
Hobby's CI-Bus board management can link
together up to 15 devices, enabling you to ope-
rate them using just one central control panel that
shows their functions on its display. (standard)
When coupled to a WLAN module, all of the
functions on the LCD control panel can be wire-
lessly controlled via your smartphone, tablet or
notebook.
After the main switch on the control panel has
been switched on and all of the connections
have been correctly attached, a WLAN network
is set up that is recognized by all WLAN-enabled
devices.
The SD card is also found on the
WLAN module. The devices are
updated on this card. This SD card
cannot be written in Windows le
format.
Turn the rotary encoder to access the WLAN
menu. Power is supplied via the battery (for self-
sufcient vehicles or hitched base vehicles only)
and/or via the built-in mains supply circuit. The
WLAN is ready as soon as “WLAN: On” appears
after the module has been switched on.
Press the rotary encoder key to access the sub-
menu in which the connection data for the WLAN
network is displayed. (The menu on the left only
shows example data.)
The WLAN-enabled device must be connected
to the network and the password must be con-
rmed: under Settings, go to “WLAN” and select
the network “meinhobby1” (in this example).
Should this not be displayed immediately, you
must rst use the search/scan function.