Operation Manual
07-13
Setting the time, alarm clock and date
• After pressing the menu button for a longer
period of time (approx. 2 seconds) the menu
for setting the current time, date, wake-up
time and activating or deactivating the alarm
clock appears.
• Within the menu's you move left or right by
turning to the various setting value.
Temperature display
• If your vehicle has a self-sufcient package or
a 12V connection, the temperature will be dis-
played. Inside temperature (above) and outside
temperature (below)
• The display is shown in increments of 0.5° C.
Calibrating the temperature
It is possible to calibrate the indoor and outdoor
temperatures shown, as temperature effects on
the sensors may lead to a deviation between the
temperature displayed and the actual temperature.
• To calibrate the displayed temperatures, please
switch to the temperature display. It is irrele-
vant whether the indoor or the outdoor tempe-
rature is displayed.
• Press the rotary/selector switch for several
seconds. The system will now switch automa-
tically to calibration mode.
• Switch to the desired area (indoor or outdoor)
by turning the selector switch. Press briey on
the switch to select the area.
• You can now increase or decrease the tempe-
rature shown by up to +-7°C in steps of 1°C.
When the desired value has been set, quit the
menu item by pressing briey on the selector
switch.
• Quit the calibration menu by using the selector
switch to select the Return icon. The changed
value is now shown on the temperature dis-
play.
Additional functions on the LCD
display for 12 V self-sufcient
mode