Operation Manual

06-7
Converting the Round Seating Arrangement
• Remove the seat
j
and back cushions
k
.
• Lower the table. (see Chapter 6.3).
• Replace the seat cushions
j
and pull them
to the middle of the table.
• Fill the outside areas with the side back
cushions
k
.
6.4 Conversion of seats and beds
The seat groups can be converted into comfor-
table beds.
Ensure that the tabletop, seat chests
and/or covers as well as cushions
are well secured so that nothing falls.
When converting seating arrange-
ments into beds, do not place the
cushions directly on the tabletop as
this may cause scratches or mildew
due to condensation. We recommend
that you use an absorbent cloth (e.g.
terry cloth or cotton).
The rear seat cushions in round seating arrange-
ments remain in place.
2
2
1
1
The swivelling table is not fastened
to the oor. Before driving, lower the
table and secure the rollers by means
of the attached transportation locks.
Swivelling table
To lower
• Pull upwards on the bow handle
j
on the
right-hand side.
• Swivel the table top downwards towards the
centre of the vehicle until the handle locks into
place.
To turn
• There are rollers on the table legs, shifted 45°,
which enable the table to be turned around its
centre point in any desired direction.
1