Operation Manual

04-8
D Hold the bottle down with the lling tube and
then press them together. Press the entire
bottle contents into the tyre. Pull the ll hose
off
j
and screw the valve insert
k
tightly
into the tyre valve with the valve-core remover
l
.
E Open the air hose
n
on the tyre valve. Insert
the plug
o
into the cigar lighter socket.
Then pump the tyres (Fig.
p
). do not operate
the electric air pump longer than 8 minutes!
Danger of overheating! If sufcient air pres-
sure is unattainable, drive 10 meters (either
forward or in reverse) so that the sealant
can be evenly distributed within the tyre.
Repeat the pumping process. Resume driving
immediately, so that the sealant can be evenly
distributed within the tyre.
Maximum speed: 80 km/h. Drive carefully,
especially in curves.
Check tyre pressure after driving 10 minutes.
If the tyre pressure has fallen under this
minimum value
q
, you may not drive any
further.
If the minimum value is still indicated
q
,
correct the tyre pressure according to the tyre
pressure table in the gas bottle container.
Drive carefully to the nearest mechanic and
have the tyre replaced.
Danger of accidents!
If the required
tyre pressure is still unattainable, the
tyre is too severely damaged. In this
case, the tyre repair kit can no lon-
ger provide an effective seal. There-
fore, do not drive any further. Notify a
service station or the 24-hour service
hotline.
F Adhere the provided sticker to the combinati-
on instrument within sight of the driver. Dispose
of used tyre repair kit at a service station.
Danger of accidents! Have the tyres
replaced at the nearest service sta-
tion.