Operation Manual

10-10
Activating the Tools menu
The Tools menu is used to control the remaining
functions of the control unit.
To activate the Tools menu, the following icons
must be pressed, as shown on the left:
Functions of the Tools menu
1 Arrow icons enabling you to switch between
the individual Tools elds.
2 Setting the clock to use functions such as
automatic start or automatic temperature.
3 Automatic temperature change to set
temperatures, e.g. at night or on individual
days.
4 Automatic start at a later time. The heating
system will run for 24 hours and repeats this
procedure every week at the same time.
The On/Off button must be set to Off.
5 Overload protection prevents 230V fuses
from overloading. If power consumption
exceeds the value that has been set, the
electric output of the heating system will
automatically be reduced.