Operation Manual

10-9
Setting the desired temperature
(+5°C to +30°C)
by pressing – or + in steps of 0.5°C.
Hot water (50°C) is always available when this is
switched on. The hot-water system is operated
electrically or uses LPG.
Setting the hot water
Should you require more hot water, the tempera-
ture can be increased temporarily from 50°C to
65°C. After 30 minutes, the hot-water heater will
switch back to normal operation. Increase the
amount by pressing +; turn the hot water off by
pressing -.
Setting the electric heating system
Use the – and + buttons to select the output
(Off, 1/2/3 kW). Preference is given to electrical
operation when selecting whether to operate on
electricity or gas.
Setting for heating with gas
Set the heating to gas operation. Start operation
with gas by pressing the On button. The heating
system will operate until the temperature you
have set has been reached. Turn gas operation
off by pressing the Off button.