Operation Manual

10-6
10.4 Electrical oor heating*
The heating system is located in the middle
walking space of the oor. It is 60 cm wide; the
length depends on the type of vehicle. This he-
ating system is not meant to heat the room; in-
stead, it reduces the loss of heat via the oor.
To turn on the 24 V oor heating
You will nd the switch on the service panel. The
oor heating operates only when the caravan has
been attached to a 230 V power supply.
Technical data
Voltage 24V~ from its own 230V/24V transfor-
mer.
Depending on the length of the caravan, power
consumption lies between 150W and 320W.
To prevent local hot spots, do not
place objects for a longer period of
time on the oor if the oor heating
system has been turned on. Do not
drill any holes in the oor or screw in
any screws.
To switch on
• Set the rotary switch to the desired power set-
ting (green indicator light will light up during
„Operation“).
• Set the desired room temperature using the
rotary switch.
To switch off
• Use the rotary switch to turn off the heater.
To distribute hot air evenly and
quickly and ensure that the surface
temperature on the heater is reduced,
the heater should be operated only
when the circulation fan has been
switched on.
Ultraheat
230 V ~
2000
500
1000
1
3
5
7
9
Ultraheat
On/Off
Room temperature
Power setting
500 - 1000 - 2000 W
Return
Quit the menu
Standard rotary switch
Menu for LCD panel