Operation Manual

05-5
To open:
• Unlock the ap with a key.
• Press the locking button.
• Open the ap by pushing down.
To close:
• Close the ap by pushing it up.
• Press the top left and right-hand corners of
the ap to ensure that all of the existing locks
actually snap into place.
• Use the key to lock the ap.
5.3 Service ap
Entry step tread
When entering and exiting the vehicle:
• Place step tread in front of the entry door to
the camper.
• Ensure that the step tread is placed on a
level surface; this prevents the step
tread from falling over.
Note the varied tread heights and,
when exiting, ensure you will step
onto rm and even ground.
Locking the upper part of the door
Model a:
• Push the bolt (4) outward.
• Connect the upper part of the door (3) to the
lower part (2).
• Push the bolt (4) inward or let it snap back
and securely fasten both parts together.
Model b:
• Turn the lever (4) to a horizontal position in
order to securely connect the upper and low-
er parts of the door.
• To close the whole door, press the handle into
the frame (1).
Never lock the upper part of the door
when the insect screen is closed. The
insect screen must always be open
when you lock the door.