Operation Manual

07-7
2
7.5 Seat chests and conversion of beds
3
Elevating table model
Conversion:
• Removetheseatandbackcushions.
• Pullthelatchofthetableframeupward 
 andrelease.
• Pullthelatchofthetableframetowards
 theinteriorofthevehicleandlowerthetable.
• Replacetheseatcushionsandpullthemto
 themiddleofthetable.
• Filltheemptyspaceswiththebackcushions.
 Todothis,turnthebackcushions(2)around
 andlaythemwiththewidersideagainstthe
 frontorstandingwall.
• Thebackcushion(3)shouldbeplacedver
 ticallyintothegaptolltheremainingspace
 invehicleswithawidthof2.5m.
  Ensurethatthetabletop,seatchests
  and/orcoversaswellascushions
  arewellsecuredsothatnothingfalls.
Theseatgroupscanbeconvertedintocomfor
-
tablebeds.