Operation Manual

01-2
Exterior
Go around the carriage and prepare for the drive as
follows:
Preparation of the vehicle
The vehicle must be hitched properly
(see guidelines for the safety hitch WS3000).
The pull rope must be connected to the base
vehicle.
Inspect the vehicle lighting.
Turn the winding stanchions and the front
landing wheel upward and secure them.
Close gas bottles. (Heating is forbidden while
driving.)
Close gas bottle compartment.
Adjust the outer mirrors on the base vehicle.
Check the camper's tire pressure
(see tire pressure table).
Close all windows.
Shut off the light on the outer tent.
Close and secure the entry door.
Close all spigots and shut-off valves on gas-
powered appliances.
If necessary, pull the electrical cord out of the
exterior socket.
If necessary, pull the television antenna in-
ward as far as possible.
If necessary, secure the roof load and lash it
to prevent slippage.
If necessary, secure all bicycles and lash them
to prevent slippage, ensuring that they do not
cover any lighting equipment.
Name plate
Number of general type approval
Vehicle ID number
Permissible maximum weight
Permissible axle load, 1st axle
Permissible axle load, 2nd axle