Operation Manual

06-9
Elevating table model
Conversion:
• Remove the seat and back cushions.
• Pull the latch (1) of the table frame upward
and release.
• Pull the latch (1) of the table frame towards
the interior of the vehicle and lower the table.
• Replace the seat cushions and pull them to
the middle of the table.
• Fill the empty spaces with the back cushions.
To do this, turn the back cushions (2) around
and lay them with the wider side against the
front or standing wall.
• The back cushion (3) should be placed ver
tically into the gap to ll the remaining space
in vehicles with a width of 2.5 m.
Ensure that the tabletop, seat chests
and/or covers as well as cushions
are well secured so that nothing falls.
1
1
2
6.5 Seat chests and conversion of beds
The seat groups can be converted into comfor-
table beds.
3