Operation Manual

05-2
Functions
The service center is equipped with the following
functions:
1. 12 V/DC lighting (halogen bulbs with a max.
of 10 watts in the service center)
2. Shock-proof sockets 230 V/AC for electrical
devices up to a max. of 1000 watts
3. Switch for 12 V lighting for roof bonnet
4. Switch with pilot light for 230 V warm water
therme
5. Four-stage electronic indicator for fresh water
tank
6. Test switch for fresh water tank indicator.
Operation of the individual
functions
The switch is used to activate the fresh water
tank indicator. The 3 press switches are used to
operate the 12 V/DC kitchen lighting, roof bonnet
lighting and the warm water therme.
5.2 Service center
5.3 Electrical supply
1
Electricity for the camper can be obtained from
the following connections:
- 230 V mains connection 50 Hz. (1)
- via the base vehicle if it is connected using the
13-pole plug (limited functions)
- via a built-in auxiliary battery (not included).
Everything that uses 12 V, such as lighting,
water supply, etc., is available.