Operation Manual
03-4
Warnings for changing the tire:
Only use the specically designated
jack for the corresponding frame
parts.
For example, on the axle pipe corre-
sponding to the swinging lever group
or on the stringer in the area of the
axle fasteners.
Damage or even an accident result-
ing from the vehicle's toppling over
can occur if the jack is applied to
other parts of the vehicle.
The jack is only to be used for
changing tires. It may not be used for
working under the vehicle!
The rotating stanchions may not be
used as a jack!
The jack is not part of the standard
equipment in this series, and is there
fore not included.
After changing the tire, the wheel
screws must be examined (after a 50
km drive) to ensure that they are tight
enough (tighten if necessary).