Operation Manual
01-6
Hints for 1 and 2:
Remove the surface coating of the coupling ball
with sandpaper (200-240 grain) and clean with a
thinning solvent or spirit.
for 3:
Polish or clean dirty or damaged coupling balls.
for 4:
Clean the surface of the friction elements with
sandpaper (200-240 grain) and then clean with
petroleum ether or spirit.
Interior
You must also prepare the interior of the vehicle.
Preparing the interior:
• Sort all loose objects and store them in their
respective compartments.
• Heavier objects should be stored as close to
the oor as possible.
• Redirect the refrigerator to 12-volt operation, if
necessary.
• Shut off all interior lighting.
•
Ensure that all uids are kept in tightly closed
containers to prevent leaks, also in the
refrigerator.
• Fasten gas bottles in their holders.
• Close the main valve on the gas container
as well as the quick-close valves in all gas-
powered appliances.
• Close all doors (including the refrigerator
door), drawers and aps tightly.
• Latch the sliding door.
• Clamp the table's safety device.
• Dismantle hanging lamps.
Do not overload the vehicle! Note the
permissible gross weight, permissi-
ble axle load(s) as well as the permit-
ted height, width and length of the
camper.
Post a list with all signicant weights
and measurements of the carriage in
a highly visible place in the base
vehicle.