User Manual

Outdoor Mode: Tapping the landing button will make the drone
will climb to 3 meters if it is not already above that alitude,
 y back to the launch point and slowly land. If the Directional
Controls are used, the drone will stop the RTL. After C-me has
moved to the desired position, it will hover.
If a rapid landing is desired, tap the Emergency Button.
When the  ight is completed, always turn off the power and
recharge the battery before the C-me is put away.
PHOTO/VIDEO
Camera Settings
White Balance (the default setting is automatic white balance.)
The settings for lighting conditions can also be selected
(Sunshine, Clouds. Night, Indoors, and Candlelight).
The Exposure, Contrast, and Brightness can be increased or
decreased as needed.
NOTE: These settings will not change when the app is closed
and opened again.
Factory Reset will set the White Balance to automatic and center
the other adjustments.
Still Photos
Tap the Camera button to take a single photo. The image will
be stored in the Photo Gallery on the phone and on an optional
memory card that can be loaded on the C-me.
Hold the camera button for 2 seconds to put the Self-timer and
Burst Mode buttons on the screen.
The Self-Timer has 3 second and 10 second timer options. Tap
the number to start the timer.
The Burst Mode has options for taking 3, 5, 10 or 15 photos at
the rate of 2 photos per second. Tap the desired number to start
the camera.
Tap the camera button to remove the Self-timer and Burst Mode
buttons from the screen.
Video
Tap the Video button to start recording a video which will be
stored in the phone’s Photo Gallery and also on the optional
memory card. A timer and Stop button will appear when the
video starts. Tap on the Stop button to end the video.
TIP: The video camera works best when the C-me is not moving.
Do not start a video until the C-me is hovering at the desired
height and distance from you.
Memory Card Not included.