User's Manual
Follow Me/Find Me 
Indoors: Tapping this button turns on the Find Me mode so 
the C-me will always point towards the pilot. The Directional 
Controls are used to position the drone. Small adjustments to 
the camera’s direction can be made by slowly turning the phone 
while in the Follow Me mode.
Outdoors: 
Tapping the C-me button will activate the Follow Me
mode. Hover the drone at the height and distance desired before 
tapping the C-me button. The drone will maintain that altitude 
and distance from the phone while the pilot is walking at a normal 
pace. While in the Follow Me Mode, holding the Directional 
Control all the way to the left or right will make the C-me slowly 
circle the phone. Keep the phone still while in this mode.
Tap the C-me button again to the exit the Find Me/Follow Me 
Mode.
SETUP
Charge the Battery
The charge time will be
approximately 1 hour and 40 minutes.
The C-me must be off while charging.
Linking the C-me and the C-me App
Power on the C-me by pressing
button until it lights up.
Open the Wi-Fi settings 
on your phone and verify 
that the C-me network 
is selected. The default 
password is 12345678.
To make sure that there will be no 
interruptions while running the C-me app, 
close any other apps that may be open.
 OPEN
The phone will have a live image from the 
camera when it is linked to the C-me.
NOTE: It make take up to 10 seconds to 
connect.










