User's Manual

REPLACEMENT PARTS

1. Propeller Set Black (4)

2. Arm Set Front A1/B1 (2)

3. Propeller Shaft Bearings 1.5x4x2mm (4)

4. Crown Gear 22T w/Shaft Set (2)

5. A/B Motor Set with 8T Pinion (2)

HCAE6001

HCAE6070

HCAE6055

HCAE6050

HCAE6040

Not Pictured:

Propeller Guard Set Black (4)

AC to USB Adapter, 5VDC, 2A, AC 120-240V

USB/Micro Charge Cord, 1M

Arm Set Rear A2/B2 (2)

Replacement Parts:

HCAE6002

HCAE6010

HCAE6011

HCAE6071

TROUBLESHOOTING

PROBLEM: The C-me App will not connect to the drone

SOLUTION: (1) Completely close the C-me app.

(2) Open the Wi-Fi setting for the phone and select

the C-me network if not already connected.

(3) Open the C-me app.

PROBLEM: I cannot remember the Wi-Fi password.

SOLUTION: The default password is 12345678. If the password

has been changed, reset the setting on the C-me to

restore the default Wi- Fi name and password.

PROBLEM: The C-me circles instead of hovering when outside.

SOLUTION: The compass on the C-me should be calibrated.

Please follow the procedure in the Calibration

section of Settings

PROBLEM: The C-me is very noisy.

SOLUTION: The propeller and/or propeller shaft needs to be

replaced.

PROBLEM: The C-me is drifting.

SOLUTION: (1) Winds are above 3mph (5kmph)

(2) The accelerometers on the C-me need to be

calibrated. Please follow the procedure in the

Calibration section of Settings

PROBLEM: The C-me is hard to control when outside.

SOLUTION: (1) The Indoor Mode setting is turned on in Settings.

(2) The C-me is not receiving 6 or more satellite signals.

(3) The wind is above 5 mph (8kmph)