- HOBART World Scale

World Scale
Supervisor Mode 4-6
Function Codes
Function Codes contain the actual values which determine how
your World Scale operates. The following Function Codes are
available in your World Scale as indicated.
Look At This
To insure proper operation, use only recommended Function
Values where indicated with an asterisk (*).
Function Name WC30 WP30 Function/
Sub-Function
Code
Function Values
FUNCTION CODE 19 - Beeper
Switch Beeper Alarm ON/OFF
(Below Zero)
Yes Yes 19 00 0 = OFF 1 = ON
Switch Keyboard Beeper ON/OFF Yes Yes 19 01 0 = OFF 1 = ON
Target Beep Yes Yes 19 02 0 = OFF 1 = ON
Error Beeper Yes Yes 19 03 0 = OFF 1 = ON
Change Beeper Volume Yes Yes 19 04 0 = Quiet 1 = Loud
FUNCTION CODE 20 - Power Saving
Change Backlight Timeout Yes Yes 20 00
BACKLIGHT TIMEOUT FEATURE CURRENTLY NOT AVAILABLE
0 = Always OFF
1 = 5 Seconds
2 = 1 Minute
3 = 5 Minutes
4 = Always ON
Change Sleep Timeout Yes Yes 20 01 0 = None
1 = 1 Minute
2 = 5 Minutes
3 = 30 Minutes
FUNCTION CODE 29 - Key Press
Change Duration of a Long PRESS
Enter the value in units of 10
milliseconds (50 – 255)
Yes Yes 29 00 Examples:
100 = 1 Second
150 = 1½ Seconds
200 = 2 Seconds
FUNCTION CODE 61 - Currencies
Change Default Price Base
(WC30 only)
Yes No 61 00 0 = 100g
1 = lb (kg) (*)
(*) Hobart recommends that you do not change this value.
FUNCTION CODE 100 (plus the PLU number) - PLUs
Unit Price Yes No 100 + 00 Values 0 - 9999999
Tare Value Yes No 100 + 01 0 = No Static Tare
1 = Tare Value
PLU price base Yes No 100 + 03 4 = (100 g)
5 = (lb) (*)
(*) Hobart recommends that you do not change this value.