- HOBART World Scale

World Scale
Introduction 1-4
FCC Note
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference; in which
case, the user will be required to correct the interference at his own
expense.
Verify Correctness of
Weight & Price
Check the multiplication of price-per-pound times weight, and
check the displayed weight. Weigh the same package several times
to verify consistency. Keep in mind that some packages which
weigh near the middle of the 0.01-lb increment will normally vary
up or down by 0.01-lb. Greater variation than 0.01-lb indicates a
need for adjustment of the system. In such cases, or whenever
necessary, contact your authorized Hobart Service Representative.
Legal for Trade
Notice
The WP30 and WC30 have been tested by the National Conference
of Weights and Measures (NCWM) National Type Evaluation
Program (NTEP) and found to comply with the applicable
requirements as published in National Institute of Standards and
Technology (NIST) Handbook 44. NTEP certificate 02-071 details
the evaluation. In addition, each scale used for commercial
weighing may require local certification, licensing or approval.
Please contact your local Weights and Measures authority to
determine if your new scale requires additional certification or
licensing. For more information, contact the NCWM at
www.ncwm.net or the NIST Office of Weights and Measures at
301-975-4004.