- HOBART World Scale

World Scale
2-5 Getting Started
Table of Key Names and
Descriptions
The table below corresponds to the Keypad layouts on the
previous page. Refer to the WC30 Price Computing Scale Keypad
and WP30 Portion Control Scale Keypad for identification.
Wherever the Keypad Symbol is different, the WC30 is shown
first.
WC30 WP30 Key Name Keypad Symbol Function
Yes Yes Display Test
Enables you to test the display to check if parts of the
LCD are working correctly. Also enables you to
communicate with the World Scale.
Yes Yes Zero
[ZERO] or [→0←]
Enables you to Rezero the scale.
Yes Yes Tare
[TARE] or [→T←]
Enables you to enter Tare information.
Yes No Quarter Pound [X4] Enables you to calculate prices by the quarter pound.
Yes No Half Pound [X2] Enables you to calculate prices by the half pound.
Yes No Numeric Keypad Enables you to enter numeric data.
Yes Yes Clear [C] Enables you to clear an entry:
To clear the last number entered, Short PRESS the
[C] key.
To clear the entire entry, Long PRESS the [C] key.
Yes No PLU (blue) [PLU] Enables you to assign a Unit Price to a PLU.
Yes No PLU 1 - 7
(white)
[PLU
1
], [PLU
2
],etc. Enables you to store the Unit Price assigned above.
Yes No Save SAVE Enables you to retain or remove prices or tares.
Yes No Add ADD Enables you to accumulate a total.
Yes Yes Right Arrow [] Enables you to go to the next branch in Supervisor
mode.
Yes Yes Left Arrow [] Enables you to go to the previous branch in
Supervisor mode.
Yes Yes Up Arrow [] Enables you to increment a value in Supervisor
mode.
Yes No Multiplier [X] Enables you to multiply By Count items of the same
price (i.e., four candy bars at $1.49 a piece).