Range User Manual

– 5 –
INSTALLATION CODES AND STANDARDS
For proper installation procedures in the United States of America, refer to:
1. State and local codes.
2. National Fuel Gas Code ANSI-Z223.1 (latest edition). Copies may be obtained from The American Gas
Association, Inc., 1515 Wilson Blvd., Arlington, VA 22209.
3. National Electrical Code ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire
Protection Association, Batterymarch Park, Quincy, MA 02269.
In Canada, refer to:
1. Local codes.
2. CAN/CGA-B149.1 Installation for Natural Gas Burning Appliances and Equipment (latest edition).
3. CAN/CGA-B149.2 Installation for Propane Gas Burning Appliances and Equipment (latest edition). Copies
may be obtained from The Canadian Gas Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W
1R3.
4. Canadian Electrical Code Part 2, CSA Standard C22.1 (latest edition). Copies may be obtained from The
Canadian Standards Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3.
ASSEMBLY
Ranges Mounted on Casters
When the range is mounted on casters, you must use a flexible connector (not supplied) that complies with the
Standard for Connectors of Movable Gas Appliances, ANSI-Z21.69 and Addenda Z21.69a (latest edition), and
a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel,
ANSI-Z21.41 (latest edition). In Canada: When the range is installed with casters, it must be installed with the
casters supplied, a connector complying with CAN/CGA-6.16 (latest edition), and a quick-disconnect device
complying with CAN 1-6.9 (latest edition).
Provide a restraining device for the gas line to limit movement of the range without depending on the connector
and/or any quick-disconnect device or its associated piping to limit movement of the range. Attach the restraining
device to the rear of the range (Fig. 1).
If it becomes necessary to disconnect the restraint, turn off the gas supply before disconnection. Reconnect the
restraint before turning the gas supply on and returning the range to its installation position.
Fig. 1
PL-51219
CONNECT GAS LINE
STRAIN
RELIEF HERE