User Guide

– 4 –

INSTALLATION

Immediately after unpacking the oven, check for possible shipping damage. If the

oven is found to be damaged, save the packaging material and contact the carrier

within 15 days of delivery.

Prior to installation, test the electrical service to make sure that it agrees with the

specications on the machine data plate located at the lower outside corner of the

oven.

LOCATION

The oven must be installed on a level surface within 5 feet of both an open drain

and a hot water supply. The installation location must allow adequate clearances

for servicing and for proper operation. Suitable space is needed for the grease

container and the chemical cleaner supply bottle and for access at the doors. For

stacked and countertop congurations, the minimum clearance on the right side

for plumbing and electrical connections is 3". For out-of-sight, drop-through utility

connection into the stand accessory, 0" clearance is required on all sides. Wood

laminates, veneers, etc. are unsuitable materials for use in areas exposed to self-

cleaning oven, steam and detergents. The rotary oven must not be installed in

high-moisture environments such as meat rooms or where high pressure cleaning

is used.

LEGS, CASTERS OR STAND ACCESSORIES

A set of four 4" tall legs is available as an accessory. Casters are included with the

stacking kit accessory. An oven stand accessory is available; the oven is mounted

on top of the stand.

Tethering is required for units equipped with casters, either on a stand or stacked.

Refer to the Stand or Stacking Kit Instructions for additional installation

information.

CONNECTION INFORMATION — GENERAL

Machine comes standard with utility connections on the right

side (Figs. 1 & 2).

For out-of-sight, drop-through utility connection into the stand

accessory, contact Hobart Service. A drop-through utilities

relocation kit is included with the stand accessory.

Legend (Fig. 1)

E1 Electrical, page 7.

P1 Water Drain, page 5.

P2 Chemical Supply, page 6.

P3 Grease Drain, page 6.

P4 Hot Water Supply, page 5.

Fig. 1